UFD5000 Fixed Doppler Meter


Doppler Flow Meters monitor the flow rate of dirty or aerated liquids including: wastewater, chemicals, acids, slurries, abrasives and viscous liquids. Recommended for full pipes and any fluid that contains solids or bubbles.  The UF D5000 strap-on sensor is mounted on the outside of a plastic or metal pipe 12.7 mm diameter or larger. To measure flow an acoustic signal is reflected back to the sensor from moving particles or gas bubbles suspended in the fluid. Installation is easy – without shutting down the flow system.  No contact is made with the moving fluid and no pipe cutting or drilling is required.  There is no fouling or scale build-up on the sensor.  The UF D5000 Doppler Flow Meter includes an ultrasonic sensor, a simple 5-key calibration system, a large digital flow rate display with totalizer, isolated 4-20mA output and two programmable control relays. Data logger and intrinsically safe sensor are optional.

Micronics UFD5000 Brochure

SKU: N/A Category:


Additional information

Weight 13 lbs
Dimensions 15 × 11 × 9 in
Doppler Power

Option A:110-240VAC, Option B: 9-32 VDC

Doppler Enclosure

Option 1: NEMA-4X IP66

Doppler Enclosure Temp

Option A: (-5° to 140°F / -20° to 60°C), Option B: Heater and Thermostat, 115VAC, 15 Watts, Option C: Heater and Thermostat, 230VAC, 15 Watts

Doppler Electronics Prot.

Option 1: Standard – no circuit board coating

Doppler Sensor

Option A: SE4 standard strap-on sensor Shielded Coax for 0.5” – 180” ID pipes

Doppler Intrinsic Safety

Option 1: Rated non-incendive for Div 2, Groups A,B,C,D, Option 2: 2ISB Intrinsic Safety Barriers (2) for SE4 Sensor installation in Class I,II,III, Div. I,II, Groups C,D,E,F,G

Doppler Sensor Cable Length

Option A: Standard 20 ft. 6m shielded coaxial pair, Option B: 50 ft / 15 m continuous shielded coaxial pair, Option C: 100 ft / 30 m continuous shielded coaxial pair

Doppler Data Logger

Option 1: None – Standard, Option 2: Two million point Data Logger (with USB output, PC software)

Doppler Control Relays

Option A: 2 – Standard, Option B: Four Extra Relays (6 total) rated 5 amp SPDT, fully programmable


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.